Welcome to Our Blog

Thank you for sharing in our journey of building and sailing a Fusion Catamaran! We are so excited to be able to chronicle our adventure for family, boat and land friends, and supporters, from the initial decision to our cruising life "down island". Please post your comments, questions, and cautionary tales-we love to hear from you!







Friday, February 27, 2015

The Adventure (Really) Begins


As I write today, we are wending our way along the bay side (also called the "inside") of the Florida Keys, passing Matecumbe and tracing along Marathon, on our eventual way to Key West.  It's been a crazy couple of weeks, first the Miami Boat Show, then a wonderful visit at our familiar port of the Coconut Grove Sailing Club, and now embarked on our first family cruise with our younger son Jon, his girlfriend Autumn, and their friend RJ.  

We arrived back in Miami on Feb 9th, and turned over XYZZY to the Mondo Team for cleaning and staging.  We settled back into a rental condo for the week, and I was really surprised how much I missed being on board. But it was great fun to meet Peter and Steve who came over from Fusion Austrailia to see the debut US Fusion 40, and we had a wonderful reception at the Miami Boat Show. We met so many folks with dreams similar to ours, some at the beginning of their search, and some coming close to the end, and we really enjoyed sharing our journey with them all.  We were certainly the smallest catamaran at the show, but definitely the prettiest as well, and not only by our judgment! XYZZY is definitely a unique package!


XYZZY at the Miami Boat Show - the prettiest little cat!

Peter and Steve from Fusion Australia with Rian

Our Mondo Team
Once the show was over, we moved her over to the CGSC dock and spent one day taking some of our vendors out for a test sail day.  Sail Magazine also came along and collected information for a spread on multihulls they are doing this summer-can't wait to see what they have to say! 

Our CGSC friends then threw a dock party on Thursday the 18th, and we had the pleasure of sharing our new home with all our old friends.  It was wonderful to see everyone and show them what we've been working on so hard for the past five years.

CGSC Welcomes XYZZY!

Parked at the Main Dock
A couple of days later we got our first onboard company (son and friends), and set about planning our first family cruise. We had thought about going to the Bahamas, but checking the forecast, it didn't look like we would have a good weather window for quite a few days, so we changed our plans and headed for Key Largo instead.

Jon, Autumn, and RJ go Exploring
Since then, we've been meandering along towards Key West, getting used to cruising life: learning about where to get water, how long our fuel lasts, the ins and outs of our electronics and trying to figure out how to entice the washer/dryer to work. (Seems to be on an unpredictable schedule, no matter what combination of buttons we use...)

Faro Blanco Yacht Club - Marathon FL

An Early Morning Swim
There are still a few things that need to be finished, a few to add (water maker!), and a few that need replaced (the bow sprit design to fly our Code Zero has blown out twice in only 8-10 knots of wind; the design will need to be reworked) but we are slowly learning to trust our boat and know her strengths and foibles. 

Over the next few weeks we are looking forward to a vist from our older son and his family, and to continuing to cruise around South Florida. We will be aiming to end up back in Sarasota at the beginning of April, for some additional work before the Sarasota Boat Show.  After that our tentative plans are to head up the ICW to go north for the comin hurricane season, and spend the summer along the East Coast.  We hope to get up to see friends in New York, Massachusetts, and Maine, before needing to head back down for the fall boat shows.

And so, our blog will transition from a build commentary to a cruising commentary, as we begin our real adventure!

Thursday, January 22, 2015

Cinderella at the St. Pete Ball !!

Our first goal, after launch, was to take XYZZY to her debut boat show in St. Petersburg, in the beginning of December.  This is an important show for Mondo Marine, as it is local to their business, and a good first show to get our boat show feet wet at.
 
After the launch, our team worked night and day up until 3AM the night before we had to leave, to get as much done as possible.  The boat would be displayed as "still under construction", but we wanted to have it as near perfect as we could.  I do have to admit that the night before we departed, I went home at 11:30PM in tears - there was just no way I could see this coming together.

But we did leave the next morning, with 11 electricians and carpenters working away all through the four-hour trip from Sarasota to St. Petersburg. I put all my concerns aside during the smooth ride north, and enjoyed being back on the water again, the first time in our own boat in almost two years. 

Here are some photos from our trip:
Captain Dennis takes her out onto the bay

Heading up the Bay to St. Pete

Under the bridge we go!
Once we were tucked into our slip, and the Mondo Team began setting up the dock area, we slipped away back home.  The next morning, we arrived back at the boat for opening day around noon, to crowds of people streaming through - asking questions, admiring the layout, fingering the cushions - it was utterly amazing.  Overnight XYZZY had been transformed from a construction project into a gorgeous luxury catamaran! I had to pinch myself to make sure I wasn't dreaming - Fairy Godmother Lari and her amazing sidekick Patti Trusel had cleaned and decorated until our pumpkin became a golden coach. 

Spruced up for the Holidays

The Mondo Booth


The next three days passed in a blur of people, questions, hellos and goodbyes...we had well over 2000 signatures in our log book.  It has been a long time since a new catamaran name came onto the market; the response was really overwhelmingly positive.  All six of us were busy every minute of each day, chatting with people, explaining, discussing our decisions - so busy that we didn't have any time to go visit other booths!  It was very satisfying to experience such validation in our choices.

Here are some photos from the show:

Bumfuzzle Presides over the Crowds

Custom Cockpit Decorations

The Joys of Boat Ownership!

Our Salon

Master Head

Cockpit at Dusk

Master Cabin
 On Monday, we packed up and headed XYZZY back to Sarasota.  It really did feel like coming home after the ball, watching the coach and four turn back into a pumpkin-under-construction.  But we had a gorgeous, peaceful ride back and the dolphins came and played along side us as we headed back down the bays.

Heading back to Sarasota

My First Lunch for the Crew!
When we returned from St. Pete, work resumed and family and the holidays intervened in our plans for a New Year's departure.  But we extended our lease one last time, and we've made great strides these last few weeks, bringing most all the projects to a close.  This past Tuesday XYZZY parked at Marina Jack's and went out under sail on Sarasota Bay for the very first time, having the rigging and sails assessed and adjusted.  This week we are cleaning and moving aboard, closing up our apartment, packing clothes, selling our car, donating even more things that we have no room for to Goodwill. 
 
My Life in Space Bags!
Plugh the dinghy goes on the stern

At Marina Jack's before our Test Sail

Test Sail under Way!
We hope to leave early next week to head down to Key Largo, where XYZZY will be hauled to have her water line repainted, and then we will sail back up the east coast to Miami, in time for the Miami Boat Show in mid-February.  What's after that?  The Bahamas!

After so long working at making this dream a reality, it is very hard to believe it will finally happen, yet it is.  Our next blog posting will be from underway!

XYZZY on the Bay

Monday, November 24, 2014

Post Launch

We are happy to announce XYZZY has been officially launched!  Work continued on Friday up until the very last minute while the crane set up, preparing to lift her into the water and then started up again soon after.  Both of our sons and their families arrived, along with friends and family from nearby, to watch the big event.

Everything went according to schedule with no major hiccups.  Below are some photos of our big day, to share with all of you who wish us well and were with us from afar.

Lifted from her cradle by the Crane

Swinging to the Water
 
Up goes the Mast!
 
Rigging the Mast!
 
Now add the Boom
 
It's a Boat!
 
The Jansma Family Together for the First Time on XYZZY
 
The next goals are to finish off the many details to get her ready for a debut in St. Pete and to schedule a test sail - still quite a few mini-projects to finish up.  But certainly having her in the water is a huge step!
 
XYZZY
Ready for an Adventure

 
Thanks to everyone whose hard work and constant effort have made this possible thus far, and to all the well wishers who are following along!


 

Wednesday, November 19, 2014

Friday Is SPLASH DAY!!!

At long last our Splash Day is here!  Friday November 21st is the day XYZZY will be launched, after much anticipation, hard work, and rescheduling.  The puzzle pieces have slowly been falling into place and there are only a few left on the table.  Engines and sail drives are in, props are arriving tomorrow, the bottom is painted, the graphic for the hulls is being put on this week, and the sails are ready!  Wiring is being run, headliner and countertops are installed, the solar panel mounts on the coach roof are done, and batteries are in.  We ALMOST got held up by not having the through hull for the forward looking sonar; this is a brand new electronic product by B&G just released, but the units are not yet in production (delayed, of course).  Not that we need the forward looking sonar right now, but we need to install the through hull before the boat can go in the water.  With no units in sight, we thought we'd have to delay yet again, but Steve Hamber of B&G generously FedExed his personal demonstration unit after the Fort Lauderdale Show, so that we'd be able to put the last hole in the hull!  Thanks Steve, this favor means so much to us! We will be your B&G show boat at St. Pete and beyond!

 

What happens on Splash Day? Besides the actual work of lifting the boat with the crane, placing it in the water, and raising the mast, there is much pomp and circumstance that should accompany the day. And of course, no celebration could be complete without food and drink.

Traditionally, the naming and launching of boats is fraught with  ceremony.  According to legend, every vessel must be recorded by name in the "Ledger of the Deep", and is known personally to Poseidon (or Neptune) the god of the Sea. But there is more to the naming than just the champagne!

 First there is a dedication, traditionally performed by someone who can sound like Richard Burton: "Oh mighty and great ruler of the seas and oceans, to whom all ships and we who venture upon your vast domain are required to pay homage, implore you in your graciousness to take unto your records and recollection this worthy vessel hereafter and for all time known as XYZZY, guarding her with your mighty arm and trident and ensuring her of safe and rapid passage throughout her journeys within your realm."

Following the dedication, libations must be offered, and the gods of the winds and sea must be honored.  This will assure the owner of fair winds and smooth seas.  There are four wind gods (one for each direction) and although they may be invoked altogether, during the ceremony they must be addressed individually.  The invocation usually used reads like this: "Oh mighty rulers of the winds, through whose power our frail vessels traverse the wild and faceless deep, we implore you to grant this worthy vessel XYZZY the benefits and pleasures of your bounty, ensuring us of your gentle ministration according to our needs."

After the invocation, champagne must be flung in each direction, asking permission of each wind god to use his powers.  Boreas, ruler of the North Wind, Zephyrus of the West, Eurus of the East, and Notus of the South-each must be acknowledged. 

Lastly, a final supplication to Aeolus and Neptune completes the ceremony: "Hail! Aeolus and Neptune! We seek your benevolence upon this vessel, now to be known as XYZZY!"  Of course, participants are also encouraged to imbibe, preferably long and often, in between each step.

In early ship-launching times, a beautiful chalice was used, and wine substituted for modern day champagne.  The costly cup was usually flung overboard after the successful launch, but that got
quite expensive and so the ritual of smashing the entire bottle against the hull was adopted instead.  Alas, during Prohibition, apple cider was the strongest offering allowed! Makes one wonder how many ships might have foundered because Neptune wasn't satisfied...

Another launch tradition involves placing a gold or silver coin under the mast.  This custom goes back thousands of years, and derives from the ancient Greek belief that when a person died he had to cross the River Styx to get to Hades (which in those days was simply regarded as the Underworld, the home of the dead, and not a bad place). However, a coin was needed to pay Charon the ferryman, and without payment, the soul might be trapped between worlds. So, in deference to any possible connection to truth (why tempt fate?), we have a 2014 minted 1/4 ounce gold Krugerrand to place as the mast is being stepped.  (2014 because it has to be minted during the model year of the boat.)

 
 
We also have a logo and a hull design, both courtesy of my younger son and his girlfriend, who are Photoshop mavens.  The logo will go on the mainsail as well as throughout the boat, and the hull design of course, goes on the sides of the hulls.


Hull Graphic Mockup

Boat Logo
 
Of course we will have additional finish work to still be completed after launch; the carpenter situation continues to lag behind schedule, so the two weeks before the St Pete show will be very, very busy. Systems will need to be tested and final touches completed.  But the end is in sight, thanks to hard work on everyone's part.
 
 
 
 
If you are in the area, please come by the Yacht Center on Friday around noon and help us celebrate.  It will be a day-long process, but sometime during midday we should have XYZZY in the water! We hope to see you there!

Sunday, September 21, 2014

Puzzle Pieces

Since our last post, the XYZZY build has made tremendous progress, albeit in the face of numerous small detours.  The best sailing advice I've ever heard is to never, ever sail to a schedule.  Don't promise to be in a port, at an airport, or on a plane at any scheduled time when the means of travel is by sailboat.  Do not attempt to use any prepositional phrase that commits you to a schedule in the same sentence as "sail". And the same goes for building a sailboat, as well, I have discovered.

Shortly after our last post, we met with our carpenter to review the installation schedule, only to find that his projected costs had somehow left out a number of steps that we'd counted on, including the installation and finishing of the carpentry in the boat! Not sure how you bid a project and leave out the installation, but now our antennae were raised. Now he wanted additional amounts to really finish the job. So we pressed a bit more to obtain a final cost commitment, and at the same time began looking for another carpentry firm to take over in case we ran into a dead-end. What a surprise to find when we walked into DoveTail's shop, that they were already working on our project! It seems that our carpenter had taken on another (apparently more lucrative) job, and subbed ours out without telling us!  The good news was that they were already familiar with the project and their work is the work we'd been seeing all along.  The bad news was that they were unaware of the schedule. (There's that word again...) When all was straightened out, we found ourselves several weeks behind where we need to be to make a late September launch date.

Our sights are now tentatively set on bringing XYZZY to the Ft. Lauderdale Boat Show at the end of October, which means a mid-October launch date. Stay tuned on this; I refuse to use the word "schedule" in conjunction with this plan.  Oh yes, "plan" is another word to avoid when discussing sailing :) .

We did a test raising of the mast and rigging on July 7th; here are some of the photos from that day:

Riggers from Mack arrive right on time!
Our mast and roller-furling boom
Where do all these lines go??
   

Success!!

Everything went very well and the riggers from Mack Sails completed all of their preparations for a later, final mast-raising without issue.  It seemed too good to be true.  It was; a few days later, with the mast safely tucked away along the yard fence, Dennis decided to measure it.  (He has had a burning desire to know the eventual height of the boat off the water since Day One, to reassure himself that we'll be able to navigate under the 65' fixed bridges of the ICW without a problem.  To accomplish this, we had ordered the mast to be 54' tall.)  Guess what?  The mast was NOT 54' feet; it was 59'!  It had been ordered through Mack from Selden, in France, and somewhere along the way the height detail was lost, and they made it the "standard" Fusion 40 height.  Fortunately, we realized it now, and not when we were approaching the first bridge, so we were able to have them trim it by 4 feet and bring it within acceptable range.  Another bullet dodged.  But after a few of these, you begin to wonder about what you don't know or haven't thought of, and confidence gets shaken (at least mine did).

Since the majority of the labor-intensive fairing, fiberglassing, sanding, buffing, polishing has been completed, now the biggest challenge is to manage the vendors who are arriving to install their portion of the project.  Each sub-project requires the right parts, the right completed materials, and often, the right weather to proceed.  There is a daily dance of readjusting what will happen next and who will be working at the yard as we deal with rain, mis-delivered parts, unavailable parts, etc.  Watching this from our vantage point can be frustrating, and we've learned to sharpen our meditation skills, to achieve a degree of equanimity about the situation!  But bit by bit, the whole comes together from the pieces, and as fewer and fewer puzzle pieces are left on the table, the way forward becomes clearer and more certain.  (As my kids will tell you, I've never been much of a puzzle person; just don't have the patience!)

Here are some pics of recent progress:
Front salon windows
Galley Window
Sliding Door
Hull Windows and Rub Rail


Salon Windows from Inside
Bamboo Veneer being Installed
More Veneer
Hatches and Headliner Preparation Inside

 

 
Hatches from Outside

Targa Bar Goes Back On Permanently - Last Piece of the Kit
Deck Hardware Being Mounted



Installing Sail Tracks

Cork Flooring Gets Installed
 
Cork with Grout - Master Bath


Salon Flooring Being Installed

Cockpit and Helm Station
 


 
Bow Pulpits


Handrails along Sugar Scoops

Stanchions for Lifelines


Laying out Helm Station
Helm Station

Corian Countertops
Guest Bath Sink & Cabinet Door

In the coming weeks, we will be finishing the interior, exterior, systems and rigging, getting ready for a launch date.  Did I say "plan"?  Nope! But the tentative date is October 9th or 10th, so if you're in the area, let us know and we'll tell you when the show begins.

What a View!